Tolomatic User Guide:
IMA-S Integrated Motor Rod-Style Actuator - Stainless Steel
• 9 •
1:
S A F E T Y
5. When shipping more than one unit in a single container, it is recommended to foam in place to
prevent damage during shipping to both the units and the packaging.
6. Add the RMA on the outside of the packaging. Failure to do so will delay processing.
Modifications to the Equipment
WARNING!
The manufacturer takes no responsibility whatsoever if the equipment is modified or if the equipment
is used in any way beyond performance specifications. Unauthorized modifications or changes to the
equipment are strictly forbidden and void all warranties.
Repair and Maintenance
WARNING!
All power and supply media must be shut OFF before any work is performed on any equipment that
is associated with the actuator. The only field maintenance that may be performed on the IMA-S
include lubrication and replacement of the rod seal cartridge. All other repair or maintenance for the
IMA-S must be performed at Tolomatic.
Requirement Regarding Personnel
NOTE!
All personnel must be completely informed regarding all safety regulations and the function of the
equipment.
Risk Area and Personnel
When installed, pinch points are generated capable of damaging forces. The risk area surrounding
the actuator must either be guarded or clearly marked, including display signage in accordance with
all applicable national and international legal requirements. The risk area must be protected by a
safety system that stops the equipment if anyone enters the risk area. Personnel who enter the risk
area must be authorized, trained and qualified for the different tasks inside the risk area.
