12(16)
2.5 Connecting the Cables:
All terminal blocks for the ball valves are parallel. This means that you can
connect valves as it suits you, you can also connect two valves in parallel in
one terminal if it is more suitable.
Terminal block - K80
Ball valve 1 is connected to V1. Red on +.
Ball valve 2 is connected to V2. Red on +.
External voltage supply b12/24 and 0v
Terminal block - K81
Water sensor between Prb and Prb.
External control of on / off with + Out, 0v, + Ext, -Ext.
+Out = the voltage fed to the control unit (12/ 24vdc)
0 v = 0 v to terminal block K80
+ Ext, -Ext = Connection to optocoupler
Terminal block - K82
Ball valve 3 is connected to V3. Red on +. (For extra ball valves)
