1. HOW TO READ THE TIME
• This watch uses Nixie tubes to display the time using the 24 hour
clock.
• The time is read like a digital watch. Press button A to illuminate the
display.
• The time in hours and minutes is shown in 3 cycles for a total of 5
seconds: hour - minutes - hour - minutes - hour - minutes.
• When the time is shown, press button A and the display will show
the progression of seconds for 5 seconds.
2. HOW TO SET THE TIME
• Press button B to enter setting mode (please use a pointed tool).
• The display will flash the current hour and the hour indicator will
light up.
• Press button A to change the hour.
• Press button B to confirm and move to minutes setting.
• The display will flash the current minutes and the minute indicator
will light up.
• Press button A to change the minutes.
• After 10 seconds the watch will exit setting mode.
3. HOW TO CHARGE THE WATCH
• When the Nixie tubes no longer light up, or if only the hour and
minute indicators light up, or if you have not used the watch for 2
months, you should recharge the watch.
• The watch can be recharged by connecting the USB charging cable
provided to the watch USB port and to your computer’s USB port.
• To open the watch USB port, use the screw driver included with the
watch so as not to damage the screw head.
• Only use the USB cable provided to recharge the watch because it is
designed for this watch.
• When charging, the blue LEDs will flash. When the blue LEDs stop
flashing, the watch is fully charged.
• It is advised that you charge the watch for 1-1.5 hours to ensure the
battery is 100% charged.
• Charging the watch for longer than 1.5 hours will not increase
battery life.
Button A
Button B
C H A N G E T H E WAY YO U T H I N K A B O U T T I M E
www.tokyoflash.com
EX
AMPLE:
33 Seconds
12 Hours
45 Minutes
