manualshive.com logo in svg

TOHATSU BFT 60A, Руководство пользователя


Поделиться
Скачать
background image

132

CONSUMER INFORMATION

EXCLUSIONS:

Failures other than those resulting from defects in material 
or workmanship are not covered by this warranty. This 
warranty does not extend to emission control systems or 
parts which are affected or damaged by owner abuse, 
neglect, improper maintenance, misuse, misfueling, 
improper storage, and/or collision, the incorporation of, or 
use of, unsuitable attachments, or the unauthorized 
alteration of any part.
This warranty does not cover replacement of expendable 
maintenance items made in connection with required 
maintenance service after the items first scheduled 
replacement as listed in the maintenance section of the 
product (outboard motor) owner’s manual, such as: spark 
plugs and filters.

DISCLAIMER OF CONSEQUENTIAL 

DAMAGE AND LIMITATION OF IMPLIED 

WARRANTIES:

Tohatsu Corporation disclaims any responsibility for 
incidental or consequential damages such as loss of time 
or the use of outboard engine, or any commercial loss due 
to the failure of the equipment; and any implied warranties 
are limited to the duration of this written warranty. This 
warranty is applicable only where the California or U.S. 
EPA emission control system warranty regulation is in 
effect.

31ZZ3T120.book  Page 132  Tuesday, November 28, 2017  2:50 PM

Содержание BFT 60A














































































































































Отзывы:

Нет отзывов

Похожие инструкции для BFT 60A

Texas Instruments TPS92518EVM User Manual preview
TPS92518EVM
Бренд: Texas Instruments Страницы: 30
SLEIPNER MOTOR AS Side-Power SEP IP Series Installation Manual preview
Side-Power SEP IP Series
Бренд: SLEIPNER MOTOR AS Страницы: 28
Ublox EVK-F9T User Manual preview
EVK-F9T
Бренд: Ublox Страницы: 23
ASROCK N68C-S Installation Manual preview
N68C-S
Бренд: ASROCK Страницы: 128
MotorGuide Freshwater Owner'S Instruction Manual preview
Freshwater
Бренд: MotorGuide Страницы: 21
Microchip Technology PIC18F57Q84 Curiosity Nano Hardware User'S Manual preview
PIC18F57Q84 Curiosity Nano
Бренд: Microchip Technology Страницы: 39
Sun Microsystems Netra CP2500 Programming Manual preview
Netra CP2500
Бренд: Sun Microsystems Страницы: 74
Rosch Computer EMB-M4 User Manual preview
EMB-M4
Бренд: Rosch Computer Страницы: 87
Zetex ZXLD1350EV User Manual preview
ZXLD1350EV
Бренд: Zetex Страницы: 8
IEI Technology KINO-780AM2 User Manual preview
KINO-780AM2
Бренд: IEI Technology Страницы: 131
MSI MS-98H6 Manual preview
MS-98H6
Бренд: MSI Страницы: 48
C-Control Duino Mega32 Quick Manual preview
Duino Mega32
Бренд: C-Control Страницы: 8
ON Semiconductor Strata Enabled NCV6357 User Manual preview
Strata Enabled NCV6357
Бренд: ON Semiconductor Страницы: 6
Energy EFM32 G890 Manual preview
EFM32 G890
Бренд: Energy Страницы: 14
ECS P45T-A User Manual preview
P45T-A
Бренд: ECS Страницы: 64
ECS NFORCE6M-A User Manual preview
NFORCE6M-A
Бренд: ECS Страницы: 70
Erreka IRPROGM Quick Programming Manual preview
IRPROGM
Бренд: Erreka Страницы: 4
JETWAY NF36-2550 Technical Manual preview
NF36-2550
Бренд: JETWAY Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды