1
2
3
2
1
1
2
4
5
6
7
3
1
7.
1
2
3
How to assemble
1. Assemble front guard according to the arrow, using 2pcs M4*10 to
tighten.
2. Insert direction lever according to the arrow.
3. Step by step according to the arrow: gasket, wheel, gasket, cotter,
wheel cover. (Use plier to tighten cotter)
4. Add 2pcs gaskets to each side of the embossing point, insert the long
side from the left side, then add wheel, gasket, cotter and wheel cover
step by step according to the arrow, add motor, wheel, gasket, cotter
and wheel cover step by step to the right side according to the arrow.
How to assemble
5. Connect handrail and back rest according
to the picture.
6. Press the button on the push bar, then insert
the push rod to the hole on the back
rest according to the picture. (It is optional)
Insert windshield to the car body.
Insert small police light to the car body.
Insert steering wheel to the direction lever, hole to hole, then use
M5*35 screw to tighten.
