Toa WM-2110 Скачать руководство пользователя страница 1

Please follow the instructions in this manual to obtain the optimum results from this unit. 
We also recommend that you keep this manual handy for future reference.

WM-2110

DESK-TOP TRANSMITTER

OPERATING INSTRUCTIONS

1. SAFETY PRECAUTIONS

• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages

regarded as very important precautions are included.

• We also recommend you keep this instruction manual handy for future reference.

Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury. 

WARNING

• Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as

doing so may result in fire or electric shock. 

• Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified

may result in fire or electric shock.

• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power

cord in close proximity to heaters, and never place heavy objects -- including the unit itself -- on the power
cord, as doing so may result in fire or electric shock. 

• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.

Doing so may result in the unit falling down and causing personal injury and/or property damage. 

• To prevent lightning strikes, install the unit at least five meters away from a lightning rod, and yet within the

protective range (angle of 45°) of the lightning conductor. Lightning strikes may cause a fire, electric shock
or personal injury.

• Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts

causes the unit to fall off, resulting in personal injury. Also, when it gets wet with rain, there is a danger of
electric shock.

• Should the following irregularity be found during use, immediately switch off the power, disconnect the power

supply plug from the AC outlet and contact your nearest TOA dealer. Make no further attempt to operate the
unit in this condition as this may cause fire or electric shock. 
· If you detect smoke or a strange smell coming from the unit.
· If water or any metallic object gets into the unit 
· If the unit falls, or the unit case breaks 
· If the power supply cord is damaged (exposure of the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds.)

• Do not place cups, bowls, or other containers of liquid or metallic objects on top of the unit. If they

accidentally spill into the unit, this may cause a fire or electric shock. 

• Do not touch a plug or antenna during thunder and lightning, as this may result in electric shock. 

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

CAUTION

• Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.
• When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord

itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock.

• Use the dedicated AC adapter for the unit. Note that the use of other adapter may cause a fire.

Содержание WM-2110

Страница 1: ...within the protective range angle of 45 of the lightning conductor Lightning strikes may cause a fire electric shock or personal injury Since the unit is designed for in door use do not install it outdoors If installed outdoors the aging of parts causes the unit to fall off resulting in personal injury Also when it gets wet with rain there is a danger of electric shock Should the following irregul...

Страница 2: ...ailures 5 NOMENCLATURE Antenna Audio signal peak indicator Power indicator Channel selector switch 3 pole phone plug cord Transmission indicator DC inlet Input Audio input Remote GND Power switch POWER TX INPUT OFF ON PWR AF PEAK Rear Top Side Bottom Accessory Front WM 2110 MIC LINE INPUT SENS MIC SW position 66 60 54 24 18 1 2 3 4 5 12 LINE Channel REMOTE M 0 0 OFF L 6 6 ON M 0 0 OFF L 6 6 ON REM...

Страница 3: ...level to match the output level of the connected equipment Refer to Section 6 2 Step 4 Set the Remote control switch to the ON position when using the remote control function and to the OFF position when not using the function Note The remote control function cannot be used depending on the type of connected equipment In such cases set the Remote control switch to the OFF position Step 5 Connect t...

Страница 4: ...operly set Set MIC LINE selector switch and Input sensitivity switch properly Transmission cannot be remotely controlled Unit is always in transmission mode Remote control switch is set to OFF position Set Remote control switch to ON position 3 pole phone plug is not properly inserted into input terminal Insert 3 pole phone plug into input terminal properly 10 IF YOU THINK THERE IS A FAILURE 11 SP...

Отзывы: