Toa VX-3308WM Скачать руководство пользователя страница 76

Страница: 76 / 89

Chapter 3

OPERATION

4. MAKING ALL-ZONE EMERGENCY BROADCAST

If normal broadcasts cannot be made due to system failure or some trouble, only an all-call is possible.

This is a broadcast made by bypassing the CPU* that normally operates in the VX-3308WM. (For details, see

the separate Installation Manual, "INSTALLATION AND SETTING PROCEDURES.")

This broadcast is called "All-zone emergency broadcast."

All-zone emergency broadcast can be made by operating the DIP switch of the RM-300X or RM-200SF

independently of settings performed using the VX-3000 Setting Software. (For operations of the RM-300X, see

p. 3-18

. For operations of the RM-200SF, see

p. 3-19

* CPU is a central processing unit, which is built in the VX-3308WM.

4.1. Priority Control of the All-Zone Emergency Broadcast

In the All-zone emergency broadcast, how the priority control operates depends on the destination to which the

RM-300X or RM-200SF is connected regardless of the priority setting made on the VX-3000 Setting software.
The relationship between the priority order and the connection destination is described below.

When broadcasts with the same priory overlap, they are mixed and output.

Connection destination with the highest priority: RS LINK A terminal of the VX-3308WM set to ID "0"

Connection destination with 2nd highest priority: RS LINK B terminal of the VX-3308WM set to ID "0"

Connection destination with 3rd highest priority: RS LINK A and B terminals of the VX-3308WM set to ID other

than "0"

First priority

RS LINK A

RS LINK B

VX-3308WM (ID: 0)

Second priority

RS LINK A

RS LINK B

RS LINK A

RS LINK B

VX-3308WM (ID: 1)

VX-3308WM (ID: 2)

Third priority

Following are operations when you activate a remote microphone to make broadcast.

• When broadcast from the remote microphone with higher priority is in progress, your broadcast cannot be made.

• When broadcast from the remote microphone with the same priority is in progress, your broadcast is mixed

with the current broadcast in progress.

• When broadcast from the remote microphone with lower priority is in progress, your broadcast overrides

the current broadcast in progress. When the overridden broadcast still continues after your broadcast is

complete, it will resume.

Note

Never make All-zone emergency broadcast simultaneously using 2 or more Remote microphones connected

to the same RS LINK connector.

Doing so may reduce broadcast sound volume and broadcast will not be made normally.

Содержание VX-3308WM


























































































Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды

Toa VX-3308WM, Руководство по эксплуатации

Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды