Toa VP-2241, Инструкция по эксплуатации

Страница: 188 / 328

Chapter 8: INSTALLATION AND SETTING PROCEDURES (HARDWARE)
1. rm-200Xf AND rm-200X mIcrOPHONES
8-10
1.4. RM-200X Wall Mounting
[Necessary mounting hardware]
To mount the rm-200X to the wall, the following parts are required.
Wall mounting bracket for the rm-210 (model WB-rm200) ...... 1 (optional)
m3.5 screw for wiring box .......................................................... 2 (supplied with the WB-rm200)
Tapping screw for wooden wall .................................................. 2 (supplied with the WB-rm200)
Step 1. Attach the WB-rm200 Wall-mounting Bracket to the wall.
In this case, leave the lINK cable out of the notch in the bracket.
• Install the unit only in a location that can structurally support the weight of the unit and the mounting
bracket. Doing otherwise may result in the unit falling down and causing personal injury and/or
property damage.
• Be sure to use 2 screws when mounting the bracket to the wall.
Step 2. Hook the bottom surface of the rm-200X onto the WB-rm200.
Step 3. Plug the lINK cable into the rm-200X's lINK terminal.
Wall mounting bracket
WB-RM200 (optional)
RM-200X
LINK
Wall mounting screw
(supplied with the WB-RM200)
LINK cable
Notch
1
2
3
WARNING