manualshive.com logo in svg

Toa VP-2241, Инструкция по эксплуатации

Поделиться
Скачать
Toa VP-2241 Скачать руководство пользователя страница 126

Chapter 7:  PC SOFTWARE OFFLINE SETTINGS

6. NEW fIlE crEATION

7-11

6. NEW FILE CREATION

create a new system setting file according to the procedure below.
The system setting file is a file to be set for the users' operation of the VX-2000 system, and includes the 
following items: VX-2000 system configuration settings, priority settings, broadcast and control pattern creation, 
and function assignment to activation items (a remote microphone, control inputs, and internal timer).

 

Step 1. 

Select [file 

 New] from the menu or click on 

 toolbar button.

The [file Name] window will open.

 Step 2.

 Enter a filename and click on the [Save] button.

The [System Information] window will open.

Continued on next page

 Step 3.

 Enter a project name, the name of Author, and Version.

Note

The version in the System Information window is not the Pc setting software version.
Enter the version here to manage your system setting file.

The system setting file is suffixed with an extension "mb2".

Note

The file extension is "mdb" for the VX-2000 Setting Software Version 2.0 or earlier.

Содержание VP-2241









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды