background image

2

1. SAFETY PRECAUTIONS

•  Before installation or use, be sure to carefully read all the instructions in this section for correct and safe 

operation.

•  Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or 

cautions regarding safety.

•  After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions 

Safety symbols and messages described below are used in this manual to prevent bodily injury and property 

damage  which  could  result  from  mishandling.  Before  operating  your  product,  read  this  manual  first  and 

understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards. 

Indicates a potentially hazardous situation which, if mishandled, could 

result in death or serious personal injury.

Indicates a potentially hazardous situation which, if mishandled, could 

result in moderate or minor personal injury, and/or property damage.

WARNING
CAUTION

•  Avoid installing or mounting the speaker in unstable 

locations, such as on a rickety table or a slanted 

surface. Doing so may result in the speaker falling 

down and causing personal injury and/or property 

damage. 

•  Install  the  speaker  only  in  a  location  that  can 

structurally support the weight of the speaker and 

the mounting bracket. Doing otherwise may result 

in the speaker falling down and causing personal 

injury and/or property damage.

•  Since the speaker is designed for indoor use, do not 

install  it  outdoors.  If  installed  outdoors,  the  aging 

of parts causes the speaker to fall off, resulting in 

personal  injury.  Also,  when  it  gets  wet  with  rain, 

there is a danger of electric shock. 

•  Do not use other methods than specified to mount 

the bracket. Extreme force is applied to the speaker 

and the speaker could fall off, possibly resulting in 

personal injuries.

•  Attach the safety wire to the speaker. If not attached, 

the speaker could fall off, resulting in personal injury 

(only when installing the speaker to the ceiling, wall, 

or pipe.) 

•  Use  nuts  and  bolts  that  are  appropriate  for  the 

ceiling’s or wall’s structure and composition. Failure 

to do so may cause the speaker to fall, resulting in 

material damage and possible personal injury. 

•  Tighten  each  nut  and  bolt  securely.  Ensure  that 

the  bracket  has  no  loose  joints  after  installation 

to  prevent  accidents  that  could  result  in  personal 

injury.

•  Use  the  specified  mounting  bracket  and  speaker 

stand in combination. Doing otherwise may cause the 

speaker or component to fall off, resulting in personal 

injury.

•  Do  not  mount  the  speaker  in  locations  exposed  to 

constant  vibration.  The  mounting  bracket  can  be 

damaged  by  excessive  vibration,  potentially  causing 

the speaker to fall, which could result in personal injury.

•  Avoid  installing  the  speaker  in  indoor  swimming 

facilities that are not well ventilated. In such a location, 

the bracket may be vulnerable to corrosion, eventually 

allowing the speaker to fall resulting in personal injury.

CAUTION

•  Avoid touching the speaker’s sharp metal edge to 

prevent injury.

•  Do not place heavy objects on the speaker as this 

may  cause  it  to  fall  or  break  which  may  result  in 

personal injury and/or property damage. In addition, 

the object itself may fall off and cause injury and/or 

damage.

•  Do not operate the speaker for an extended period of 

time with the sound distorting. Doing so may cause 

the connected speakers to heat, resulting in a fire.

•  Do  not  stand  or  sit  on,  nor  hang  down  from  the 

speaker as this may cause it to fall down or drop, 

resulting in personal injury and/or property damage. 

•  Have the speaker checked periodically by the shop 

from where it was purchased. Failure to do so may 

result in corrosion or damage to the speaker or its 

mounting bracket that could cause the speaker to 

fall, possibly causing personal injury.

WARNING

Содержание SR-F04









Отзывы: