background image

INSTALLATION
MANUAL

CEILING MOUNT SPEAKER

PC-1869S

Thank you for purchasing TOA's Ceiling Mount Speaker. 
Please carefully follow the instructions in this manual to
ensure long, trouble-free use of your equipment.

• Before installation or use, be sure to carefully read all the

instructions in this section for correct and safe operation.

• Be sure to follow all the precautionary instructions in this

section, which contain important warnings and/or cautions
regarding safety.

• After reading, keep this manual handy for future reference.

1. SAFETY PRECAUTIONS

Indicates a potentially hazardous situation which, if
mishandled, could result in moderate or minor
personal injury, and/or property damage.

CAUTION

• Avoid touching the unit's sharp metal edge to prevent

injury.

• To avoid electric shocks, be sure to switch off the

amplifier's power when connecting speakers.

• Do not operate the unit for an extended period of time with

the sound distorting. This is an indication of a malfunction,
which in turn can cause heat to generate and result in a
fire.

Integrated with a speaker unit and panel, the PC-1869S
Ceiling Mount Speaker is of metallic construction and ideal
for use in a voice alarm system. It features spring catch
mechanism for easy speaker mounting to the ceiling.
The input impedance can be easily changed by changing
the tap position of the transformer.
The push-in type input terminal block makes cable
connections easy and allows bridge wiring. 

2. GENERAL DESCRIPTION

6 W (100 V line), 3 W (70 V line) 
100 V line: 1.7 k

Ω

(6 W), 3.3 k

Ω

(3 W), 6.7 k

Ω

(1.5 W), 13 k

Ω

(0.8 W) 

70 V line:  1.7 k

Ω

(3 W), 3.3 k

Ω

(1.5 W), 6.7 k

Ω

(0.8 W), 13 k

Ω

(0.4 W) 

90 dB (1 W, 1 m) (500 – 5,000 Hz, pink noise)
55 – 18,000 Hz (at 20 dB below peak) 
12 cm (5") cone type 
ø150 ±3 mm (5.91" ±0.12") 
Max. 34 mm (1.34") 

Note:

Max. 50 mm (1.97") allowable when Ceiling clamp is bent. 

Spring catch 
600 V vinyl-insulated cable (IV wire or HIV wire) 
Solid wire: 

ø0.8 –ø1.6 mm (equivalent to AWG 20 – 14) 

7-core twisted wire: 0.75 – 1.25 mm

2

(equivalent to AWG 18 – 16) 

Push-in connector (bridging terminal-2 branch type) 
Baffle: Steel plate, off white (RAL 9010 or equivalent color), paint 
Grille:  Surface-treated steel plate net, off white (RAL 9010 or equivalent color), paint 
ø180 x 111 (d) mm (ø7.09" x 4.37") 
750 g (1.65 lb) 

4. SPECIFICATIONS

Note:

The design and specifications are subject to change without notice for improvement. 

Rated Input 
Rated Impedance 

Sensitivity 
Frequency Response 
Speaker Component 
Dimensions for Fixing Hole  
Ceiling Thickness for Mounting

Speaker Mounting Method 
Applicable Cable 

Connection 
Finish 

Dimensions 
Weight 

• Install the unit only in a location that can structurally

support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and
causing personal injury and/or property damage.

• Do not use other methods than specified to mount the unit.

Extreme force is applied to the unit and the unit could fall
off, possibly resulting in personal injuries.

Indicates a potentially hazardous situation which, if
mishandled, could result in death or serious personal
injury.

WARNING

3. WIRING DIAGRAM

8 Ω

13 kΩ

6.7 kΩ

3.3 kΩ

1.7 kΩ*

* Factory-preset

0

COM (white)

COM

(–) 

HOT (black)

HOT

(+) 

Matching 
transformer 

Input connector

COM

Отзывы: