19
8.5. E-7000TB Terminal Board Wiring
For cable connection to the E-7000TB Terminal Board use the optional YC-105, clipping tool.
Hook the end of the cable onto the terminal and, with the cable end in hand, press the YC-105 Dedicated Tool
down onto the terminal from above. Pressing down the YC-105 tool cuts off the excess cable end, securing the
connection.
For cables, refer to p. 16, "Type of Cable."
Terminal board E-7000TB
Cut end
Cable
Hook the cable onto
the terminal without
stripping the cladding.
Terminal
Yellow
Gray
Clipping tool YC-105 (Optional)
Bind the cables using cable clips
supplied with the E7000TB.
