background image

2

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct 

and safe operation.

• Be  sure  to  follow  all  the  precautionary  instructions  in  this  section,  which  contain  important 

warnings and/or cautions regarding safety.

• After reading, keep this manual handy for future reference.

Indicates a potentially hazardous situation which, if mishandled, could 

result in death or serious personal injury.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could 

result in moderate or minor personal injury, and/or property damage.

CAUTION

WARNING

When the Unit is in Use
• Use  TOA’s  IR-310BC  Battery  Charger  when 

recharging.

 The infrared wireless microphone can be 

powered by optionally available nickel metal 

hydride (NiMH) batteries. The use of any 

other than the specified charger could result 

in  fire,  personal  injury  or  environmental 

contamination due to battery rupture or 

leakage. 

• Stop  charging  if  the  batteries  are  not  fully 

charged within 3 hours. Failure to do so may 

cause the batteries to fire, explode, leak, or 

heat.

• Never  short-circuit  the  charging  terminals 

on the bottom of the microphone with metal 

objects.

  Doing so could result in electric shocks or 

burns.

• To  prevent  the  electromagnetic  wave  from 

badly  influencing  medical  equipment,  make 

sure to switch off the unit’s power when 

placing  it  in  close  proximity  to  the  medical 

equipment.

When the Unit is in Use
• When  the  unit  is  not  in  use  for  14  days  or 

more, be sure to take the batteries out of 

the unit because battery leakage may cause 

a  fire,  personal  injury,  or  environmental 

contamination.

• Make sure to observe the following handling 

precautions  so  that  a  fire  or  personal  injury 

does not result from leakage or explosion of 

the battery. 
· Be  sure  to  use  only  the  IR-200BT 

Rechargeable Battery designed for use with 

the infrared wireless microphone.

· Do not short, disassemble, heat nor put the 

battery into a fire.

· Do not solder a battery directly.

· Note correct polarity (positive and negative 

orientation) when inserting a battery in the 

unit.

· Avoid  locations  exposed  to  the  direct 

sunlight, high temperature and high humidity 

when storing batteries.

• When  you  discard  batteries,  please  contact 

the local dealer from whom you bought. 

CAUTION

Содержание IT-310M













Отзывы: