manualshive.com logo in svg

Toa IP-A1SC15, Руководство по установке

Поделиться
Скачать
Toa IP-A1SC15 Скачать руководство пользователя страница 38

38

18. IP SETTING TOOL

The IP Setting Tool allows multiple units to be efficiently set up. It also makes it possible to save the unit's 

setting contents to the PC or upload to the unit settings contents stored on the PC. Using this function, the same 

settings can also be duplicated onto multiple units. Only use the IP Setting Tool while both the PC and the unit 

are connected to the same network. (See 

"CONNECTION" on p. 5

.)

18.1.  Before Using:

On the TOA DATA Library (https://www.toa-products.com/international/), perform a search for the product 

number "IP-A1SC15" and download the "IPSettingTool.exe" IP Setting Tool. The following shortcut icon appears 

on the desktop: 

18.2.  Starting the IP Setting Tool

Double-click on the "IPSettingTool.exe" icon.

Notes

•  When the PC has access to multiple network adapters, the confirmation 

screen as shown at right is displayed. Select the network adapter that 

can be connected to the unit and click on the OK button.

•  When the IP Setting Tool is enabled and all connected units are automatically detected and displayed in the 

list, as shown in the following screen, the right-side buttons appear grayed-out and are rendered inoperative. 

Содержание IP-A1SC15


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды