INSTALLATION MANUAL
SPEAKER STAND ADAPTER
HY-ST04
Thank you for purchasing TOA’s Speaker Stand Adapter.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read
all the instructions in this section for correct and
safe operation.
• Be sure to follow all the precautionary instructions
in this section, which contain important warnings
and/or cautions regarding safety.
• After reading, keep this manual handy for future
reference.
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
WARNING
• Since the unit is designed for indoor use, do not install
it outdoors. If installed outdoors, the aging of parts
causes the unit to fall off, resulting in personal injury.
• Do not use other methods than specified to mount
the bracket. Extreme force is applied to the unit and
the unit could fall off, possibly resulting in personal
injuries.
• Tighten each nut and bolt securely. Ensure that
the bracket has no loose joints after installation
to prevent accidents that could result in personal
injury.
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
CAUTION
• Avoid touching the unit’s sharp metal edge to
prevent injury.
• Do not stand or sit on, nor hang down from the unit
as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
2. GENERAL DESCRIPTION
The TOA HY-ST04 is the dedicated speaker stand
adapter for the SR-F04 Speaker system. It allows the
SR-F04 to be mounted in a vertical orientation.
3. DIMENSIONAL DIAGRAM
70 (2.76")
130 (5.12")
101 (3.98")
82.6 (3.25")
[Top]
[Side]
[Front]
Unit: mm
• Have the unit checked periodically by the shop from
where it was purchased. Failure to do so may result
in corrosion or damage to the unit or its mounting
bracket that could cause the unit to fall, possibly
causing personal injury.
4. SPECIFICATIONS
Finish
Steel plate, black, semi-glossy, paint
Dimensions
130 (w) x 82.6 (h) x 70 (d) mm
(5.12" x 3.25" x 2.76")
Weight
300 g (0.66 lb)
Applicable
Stand
Optional ST-34B or the generic speaker
stand with a ø35 mm pipe
Note: The design and specifications are subject to change
without notice for improvement.
• Accessories
Speaker mounting knob bolt (M8) . ............ 2
