TMS Lewis End Table 72401WHT, Руководство по сборке

Страница: 3 / 11

CAM-BOLT and CAM-LOCK
INSTRUCTIONS
Align the arrow o n the Cam-lock to the Cam-
bolt head and insert the Cam-lock.
CAM-LOCK
�
+
@®
--x
; ;
CORRECT WRONG
CAM-BOLT
I nsert C am-bolt into the pre - drilled hole . U se a
P hillips S crewdriver to tighten until shoulder is flush
with the panel . S ee illustrations below .
SHOULDER
X
Use a flat screwdriver to turn the Cam-Lock
clockwise one half a turn so it locks onto the head
of the Cam-lock. Turn only until it is snug – over-
tightening could damage Cam-lock or/and Cam-bolt
3/11