・
The explanation here is only for the particular point of Cal.VH31A
1.REMARKS ON DISASSEMBLING
AND
REASSEMBLING
(1)HAND
・
How to install hands:
Place the movement directly on a flat metal plate
or such a hard plate when you install the hands.
Necessary procedure to setting hands:
①
Set the dial.
②
Install the hour and minute and second hands at the 12 o'clock position.
(2)Winding stem
・
How to remove:
Pull out the winding stem while pushing
the indented portion of the arrow.
(3)Battery
・
How to install:
Insert the battery in the aslant direction as shown by the arrow.
Check the battery connection (+) securely touches the
side face of the battery.
・
How to remove:
Firstly slide the battery in the direction of the arrow with tweezers,
and then lift the battery.
(4)Insulator
・
How to set:
To insulate between the battery connection (+)
and the battery connection (-), the insulator
should be put at the two pins securely as bellow.
TECHNICAL GUIDE
Version-01
VH31A
SII Products
5
Insulator
Pin
Metal plate
Push
