►
www.tmgindustrial.com P16 / 17 Toll Free: 1-877-761-2819
Cleaning and Maintenance
Before using your infrared sauna for the first time, clean the inside of the sauna with a
damp cloth. If the smell of the sauna is strong at first, that is normal and please open
the door while the sauna is working. The smell will diminish within a weekend.
Use furniture polish to clean the exterior.
We recommend placing a soft towel on the floor and on the bench of the sauna to
absorb perspiration during sauna use.
Scratches and stains on the sauna can be removed by simply using fine grade
sandpaper over the damaged area.
Troubleshooting Guide
Problems
Explanations
Solutions
1
Power indicator
light not on
Power cord is not plug-in
1. Check for power to the outlet.
2. Check connection between power
cord and main control unit.
The fuse is burned out
Check or replace the fuse.
2
Function
indicator
light not on
The corresponding indicator
light is
broken or burned out.
Repair or replace the control
panel.
The wiring or some
electronic component in the
circuit has failed
Repair or replace what has failed in
that circuit.
3
Infrared Heater
will
not heat up
The heater is broken
Replace with a new heater of the
same specifications.
Its life will be shortened
gradually from excessive use.
The fuse is burned out.
Check or replace the fuse.
The wiring connection for the
heater is loose or in the
wrong location.
Check it, and reconnect tightly.
The circuit board is not
functioning.
Check power output on the circuit
board
4
Sauna room not
maintaining
correct
temperature/
Display shows
E1
Problem with heater.
See Item #3.
Incorrect setting on control
panel
Reset it.
The temperature sensor wire
may be loose or broken.
Check sensor wire connection and
condition. Check to see if sensor
head is visible inside the sauna room.
