Wireless NVR Kit Manual
32
Explanation
If you need to set motion detection for other channels, repeat the above steps.
The default sensitivity for video detection is "higher".
4.6.4 Alarm recording
Function explanation
：
Turn on the alarm recording function, the system will record when detecting the
alarm input.
Steps
：
1, Right click on the main interface and select System Setup in the shortcut menu.
2, In the "System Setup" interface, select the alarm setup for the recording schedule. As shown below
：
3, Select the alarm type, alarm serial number and alarm area, trigger the type of alarm, click "Add". Waiting
30 seconds, there will prompt "add success".
4, After adding successfully, you can set the alarm continuity, video channels and video alarm mode.
5, Select the channel that needs to trigger the recording.
6, For the alarm recording plan configuration, refer to "4.6.2 Recording Plan Configuration Method of Timed
Recording", and check the "Alarm" checking box.
7, Click the "OK" button to save the alarm recording setup.
Explanation
If you need to set the alarm input of other network cameras, please repeat the above steps.
If the other alarm inputs are consistent with this alarm input setup, select the channel and click the
"Copy to" button.
