TMC TI5VG, Руководство пользователя

Страница: 43 / 71

Chapter 6 BIOS Configuration
TI5VG Pentium VP3 ATX Motherboard User’s Manual 39
Quick Power On Self Test
This choice speeds up the Power On Self Test (POST) after you power up
the system. If it is set to
Enabled , BIOS will skip some items. By default,
this choice is Enabled .
Boot Sequence
This field determines the drive that the system searches first for an
operating system. The options are :
A, C, SCSI D, A, SCSI SCSI, C, A
C, A, SCSI E, A, SCSI C only
C, CDROM, A F, A, SCSI LS/ZIP, C
CDROM, C, A SCSI, A, C
The default value is A, C, SCSI .
Swap Floppy Drive
This item allows you to determine whether to enable Swap Floppy Drive
or not. When enabled, the BIOS swaps floppy drive assignments so that
Drive A becomes Drive B, and Drive B becomes Drive A. By default,
this field is set to
Disabled.
Boot Up Floppy Seek
When enabled, the BIOS will seek whether or not the floppy drive
installed has 40 or 80 tracks. 360K type has 40 tracks while 760K, 1.2M
and 1.44M all have 80 tracks. By default, this field is set to
Enabled.
Boot Up NumLock Status
This allows you to activate the NumLock function after you power up the
system. By default, the system boots up with
NumLock On.
Boot Up System Speed
This has no function and selects the default system speed (High).
Gate A20 Option
This field allows you to select how Gate A20 is worked. The Gate A20 is
a device used to address memory above 1 MB. By default, this field is set
to
Fast.
Memory Parity/ECC Check
Set this option to Enabled, when the memory installed in your system
supports ECC (error correction code) or parity. By default, this field is set
to
Enabled.