Silverado/Sierra-2019
Summary of Electric Part
Summary of Electric Part
Wired magnetic induction
module arrangement
Battery
Power board
switch
Signal wire
arrangement
Motor wire
arrangement
Controller
Motor wire
connection
Pull signal wire and Power board switch into the vehicle
connection
Step 9 : Check out the Power board switch of controller to make sure it is off. Insert back the fuse , arrange the wire
harness in order. Check if all the wires are connected well and test if the power board can work normally . If it can
work normally ,the board installation is completed. (If it can not work normally , please check the completeness of
installation of each part.)
19
www.tmax.biz
installation of each part.)
