172-65419MA-05 (FJ32D-B+BD2) 1 Oct 2021
6
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use this product in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
*Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
**Valve No. is displayed for products with options. This item is omitted from the nameplate when
there are no options.
***The nominal diameter is not printed on the trap unit nameplate when the trap unit is shipped by
itself.
Compatibility
The FJ32 QuickTrap series employ a unique TLV connector unit (F46J) and are not
compatible with QuickTraps using connector unit F32 or others.
Trap and connector units must only be used with compatible models.
The unit name is embossed on the connector body.
Model
Maximum Allowable
Pressure*
Maximum Allowable
Temperature (TMA)*
Production Lot No.
Nominal Diameter***
Maximum Operating
Temperature
Maximum Differential
Pressure
Valve No.**
