875700 MF 100 User Manual
TLS electronics GmbH – www.tls-electronics.de
contact :
2
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future
reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be
damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
Use of surge protection systems is highly recommended in order to
protect and extend the life of your equipment.
SAFTY
AND
NOTICE
1) The transmission distances of HDMI over UTP cables are measured
using TE CONNECTIVITY 1427071-6
2) EIA/TIA-568-B termination for CAT cables is recommended for better
performance.
3) DO NOT use 568A/568B standard mixed CAT cable (cross-over cable)
because there are 2 pairs swapped, this will make POH
OVER-CURRENT and damage POH components. Please use
straight-through CAT cable (both RJ45 headers are 568A or 568B
standard).
4) It is recommended that power up the device after connections of
source, sink and CAT cable.
5) To reduce the interference among the unshielded twisted pairs of
wires in CAT cable, do not run HDBaseT / Zone Cat5e/6/6a cabling
with or in close parallel proximity to mains power cables. Shielded
CAT cables can be used to improve EMI problems, which is worsen in
long transmission.
Содержание 875700 MF100
Страница 1: ...875700 MF 100 User Manual...
