5. Operating of system
Identifying and conversing with callers
When a caller presses the CALL button on the outdoor unit:
An electronic door chime sounds DING-DONG and the visual image
appears on the screen. (Same to slave monitor (optional))
Assuming that your visitor is standing within the range of the camera, you will see the visitor on
the monitor screen of the indoor unit
After identifying the visitor you can:
Talk to the visitor shown on the screen by lifting Handset and have conversation just as
you would on a normal phone.
Replace the handset.
Pressing the CALL button on the outdoor unit activates the camera for 30 seconds only without
lifting the handset. However, if you should continue to talk using the handset for longer than 30
seconds, the camera and monitor screen will be on for 2 minute or longer by pressing monitor
button.
Electronic Door Release Option
If your Video Doorphone System is equipped with the Electronic Door Release option (or has
been installed for the use of this feature), you can let your caller in simply by pressing the DOOR
OPEN button. (Only available when monitor screen is on)
Additional Inter-Phone option
A supplementary Slave monitor is available as an option to enhance the function of
intercommunication with the main monitor. When a visitor presses the CALL button on the out
door unit, the electronic chime sounds simultaneously with the main unit. Even during the
intercommunication with the main unit, you may talk to the visitor at door simply by pressing the
monitor button
Monitoring visitors
To identify visitors at the door without them being aware that they are being watched or to monitor
the immediate area around the doorway:
Press the MONITOR button
Without lifting the handset, your visitor will now be seen on the screen, but will be unaware of that
they are being monitored. This particularly useful feature allows you to monitor the visitors at door
even though they may not have pressed the CALL button and can help to avoid the risk of
opening the door to strangers.
1.
MICROPHONE:
Visitor speaks through microphone.
2.
CAMERA LENS:
It delivers a sharp image to camera's sensitive CCD sensor.
3.
INFRARED LED:
Even in low light, high quality viewing.
4.
SPEAKER:
Visitor hears your voice from speaker.
5.
CALL BUTTON:
A chime sound and the camera operate when pushed.
6.
WIRED TERMINALS TO MONITOR:
Connect with wires to the monitor as shown in the wiring
diagram.
7.
HOLE COVER:
After fixation of front cabinet on back cabinet with screw in whole, put hole cover
on the hole.
Surface camera with plastic
Flush metal camera PIN hole lens
4-2. Camera unit
1
2
3
7
4
5
6
C A L L
1 2 3 4 5 6
<Front view>
<Rear view>
C A L L
1
2
3
4
5
6
2
1
3/7
5
4
6
<Front view>
<Rear view>
