TKH Group Security Solutions HSD820v2H3-E Скачать руководство пользователя страница 67

Страница: 67 / 105

6.14

Factory default

System > Factory default

The Factory default page enables administrators to reset the camera to the default factory
settings.

To perform a full restore to the default factory settings

On the System tab, click Factory default in the menu on the left.

Click Full Restore.
The system will restart in 30 seconds.

Note: The camera's IP address will be restored to the factory default IP address - that
is, 10.x.x.x.

To perform a partial restore (excluding the network settings)

On the System tab, click Factory default in the menu on the left.

Click Partial Restore.
The system will restart in 30 seconds.

Note: The camera's current network settings will not be affected by the restore.

To restart the system without changing its settings

Click Reboot.

Refresh the webpage after the system has restarted.

System settings

Содержание HSD820v2H3-E










































































































Результаты поиска

Содержание HSD820v2H3-E

Отзывы:

Бренды по названию

Популярные бренды

TKH Group Security Solutions HSD820v2H3-E, Руководство пользователя

Результаты поиска

Содержание HSD820v2H3-E

Отзывы:

Бренды по названию

Популярные бренды