Motion Detection alarms will not trigger if the Motion Detection function is disabled or while
the Motion Detection settings are saving. In these cases, the motion indication window
displays the text, Motion Detection Is Not Active.
Motion detection is disabled.
6.8.3
Network Failure Detection
System > Network failure detection
Ping request
The network failure detection function enables the HSD820v2H3-E to test the connection
between the camera and a target host on the network (for example, an NVR, VMS, or Video
Server). The camera can ping the remote machine - that is, send data packets to it, with
configurable intervals to determine if it is accessible and responding. Appropriate actions can
be selected to be triggered if the ping request times out without a response. Being capable of
implementing local recording when network failure occurs, the camera can be a backup
recording device for the surveillance system.
Detection Switch
Click On or Off to enable or disable the Network failure detection alarm, respectively.
Alternatively, you can use By schedule to activate Network Failure Detection according to a
schedule you have previously set on the Schedule page.
System settings
53
