manualshive.com logo in svg

TK TW45C, Руководство по эксплуатации


Поделиться
Скачать
background image

58

Transportation and storage

Packaging

TK Elevator

BA, TW45C | 6231003860 | 06/2022

5

Transportation and storage

5.1

Packaging

NOTICE

Rust on components of the drive!

Damage and possibly loss of function of the product.

Check the "anti-corrosion foil" for damage.

In the case of larger traction sheaves, the gear housing is bolted onto wooden
blocks.

Fig. 28

 

ATR_2_21_0044_0

The gear housing is bolted directly onto the pallet (special pallet 1200x800)

Fig. 29

 

ATR_2_21_0045_0

Further packaging depends on the order and is country-specific (air/sea/land
freight).

Refer to the delivery note for the dimensions and weight.

Observe the symbols attached to the packaging or in visible locations.

Dispose of used packing material in an environmentally responsible man-
ner.

i

Specific transport equipment and shipping braces remain with the customer.

Содержание TW45C





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для TW45C

Бренды по названию

Популярные бренды

Загрузить еще бренды