TJM Pro Series Single Air Compressor: Installation and User Manual
For product warranty please refer to our website www.tjm.com.au
File: F-17800
Page 7 of 19
10/12/2021
3.0
Vehicle Mounting
3.1
Mounting Location
When deciding an appropriate place to mount the compressor within the vehicle, consider the following:
o
Carefully consider the mounting location of the compressor. There must be a minimum of 10mm
clearence from the Air Filter surface & a minimum of 15mm clearence from the fan housings of the
compressor.
o
Avoid proximity to heat sources.
o
Avoid exposure to direct sunlight.
o
Avoid mounting in areas which are submerged during a water crossing.
o
Ensure that the air filter inlet has access to cool, dry air.
o
Ensure there is adequate clearance for air flow to the air filters and from the compressor exhaust
fans.
o
Compressor will become hot when used, ensure it is out of reach of children or pets, and away from
flammable materials.
o
The compressor should be mounted only on rigid panels with a thickness of no less than 1.5mm.
o
The bracket backing plates (F-25479) may be used for additional rigidity and shall be used if
mounting to a panel less than 2.0mm thick.
o
Before installation, consider the location of the 2-Pin connectors.
