TiVo Media Device, Руководство пользователя, Страница: 84 / 139

Settings
72
5
4.
Press and hold the PAUSE and TiVo buttons simultaneously until the red light at the end of
the remote control comes on, remains steady, then stays on when you release the buttons
(about 5 seconds).
5.
Point the remote control at media device #1. Use the number buttons on the remote control
to enter the number “1.” Press the RIGHT arrow. On screen, the Remote Address changes to
“1.”
6.
Side 1 now controls media device #1 only. You can test this by pressing the TiVo button.
7.
Set up side 2 of the DVR SWITCH (or side 2 might still control both media devices). First,
make sure your TV is displaying media device #2. Then remove the cover you placed in
from of media device #2 and cover the front of media device #1.
8.
Go to the System Information screen of media device #2, and press the DOWN arrow until
you see Remote Address displayed.
9.
Move the media device SWITCH to 2. Repeat steps 4 and 5, above. Assign the number “2”
to media device #2, then press the TiVo
®
button to go to the TiVo Central
™
screen.
Now when you set the DVR SWITCH to 1, it will only control media device #1—and when you
set it to 2, it will only control media device #2.
Resetting the DVR SWITCH
1.
Move the DVR SWITCH to 1.
2.
Press and hold the PAUSE and TiVo buttons simultaneously for about three seconds, until
the red light at the end of the remote control comes on and remains steady.
3.
Using the number buttons on the remote control, enter 0 (zero). The red light at the end of
the remote control will flash to indicate that DVR SWITCH 1 is reset.
By default, all media devices and
remote controls have a Remote
Address of “0” (zero). A remote control with
a Remote Address of “0” will control any
TiVo Media Device, even one with an
assigned code. A media device set to “0”
will respond to any remote control, even
one with an assigned code. This prevents
you from becoming accidentally “locked
out” of controlling your media devices.