Titon TP 556, Руководство по эксплуатации продукта

Страница: 11 / 16

11
How to Change Filters
1. Remove Front Cover using 3mm Hex Key provided;
2. For Pre-Filter slide out filter from casing using handle attached to filter;
3. For Active Carbon Filters unscrew M5 screws using 3mm Hex Key on the top mounting rails as shown, and slide out
filter from casing. Only perform this action one filter at a time as filters may drop when mounted in a ceiling void;
4. Replace Active Carbon filters one at a time. Slide filter into casing and fully screw down the M5 screw in filter rail, do
not over tighten.
5. Replace Pre-Filter by sliding back into casing. Ensure the airflow direction corresponds with
the direction arrow on filter;
Disposal of Filters
The carbon within the filters are impregnated with chemicals and therefore has to be treated as specialist waste. The
disposal of the filters must be carried out by a specialist waste disposal company and not by the inhabitant of the property.
The Active Carbon Filters are Dangerous for the Environment.
Titon® do not offer a waste disposal service and therefore cannot accept filters for disposal, but can recommend the
following company:
Environmental Resource Group Tel: 0844 692 0000 Web: www.environmentalresourcegroup.com
DO 5463 Iss 01