25
Boost Speed Settings
Once the Continuous and Boost
speeds have been set, remove the
jumper and return to the stored
position.
Select required boost overrun using
switch 1 and 2 on the speed selec-
tion switch.
Check boost activation by triggering
the remote boost switch device.
Resetting the Controller
If necessary the controller can be reset into the Quick commissioning mode.
Place the jumper in to the ON position.
Switch the power to the unit OFF for at least 1 minute.
Switch the power to the unit back ON. The unit will now run at 50% capacity by
default.
Remove the jumper and place it back into it stored position.
The controller will now be in the Quick Commissioning mode.
9.
10.
11.
1.
2.
3.
4.
Full Commissioning
on dip
1 2 3 4
on dip
1 2 3 4
5 minute
10 minute
on dip
1 2 3 4
on dip
1 2 3 4
15 minute
20 minute
Boost Overrun selection switch settings in Full Commission Mode
Stored
ON
Jumper Positions
CME1_Q_Plus_Product_Manual.indd 25
CME1_Q_Plus_Product_Manual.indd 25
24/09/2009 15:15:34
24/09/2009 15:15:34
