12
Installation
Fixing
The CME1 must be securely fi xed to a
smooth fl at surface, any orientation
is possible.
Mark the four fi xing hole centres
using the BASE as a template
Drill holes for fi xings, use 4mm
Pan Head screws. Always use a
fi xing type and length suited to
the substrate type. The unit weighs
approximately 5kg.
Mount the BASE, ensuring it is not
distorted by the fi xings or mounting
surface.
Clip the MOTOR and LID assembly to
the BASE, ensure that all 6 clips have
engaged.
Do not use power tools to tighten
screws. Tighten screws by hand.
Do not over tighten screws.
1.
2.
3.
4.
5.
1
2
3
4
5
6
260
260
EX
TRA
C
T
PORT
CME1_Q_Plus_Product_Manual.indd 12
CME1_Q_Plus_Product_Manual.indd 12
24/09/2009 15:15:23
24/09/2009 15:15:23
