TiTLEY Scientific CHORUS страница 44 Скачать руководство пользователя

Страница: 44 / 48

How do I set up the recorder for acoustic (audible sound) recording?

If you are using the Chorus with an acoustic microphone/s to record audible frequencies (e.g.

birds, frogs, other vocalising wildlife), you will need to ch eck the following settings:

Mount one or two acoustic microphone/s with wind socks on the recorder. If only

using one acoustic microphone,

side

A).

Place the recorder in your desired Recording Mode (Continuous, Day Only, Night Only,

Dusk & Dawn or Schedule).

Change the Sample Rate to an acoustic

frequency (96, 48, 44.1, 32 or 22.05ksps)

The Check LED on the front keeps flashing.

If the Check LED is flashing without the magnet applied, it means there is an issue affecting

deployment. Do not deploy until you resolve the issue. To check the issue/s, open the case

and look at the status message/s on the dashboard. See

Flashing Status Icons

for more

information on how to resolve these issues.

Can I record ultrasonic and acoustic at the same time?

You are unable to record ultrasonic and acoustic simultaneously, however you can create a

schedule to record ultrasonic and acoustic during the same deployment. For example, you

can record acoustic through the day and ultrasonic through the night. To do this, you will

need an acoustic microphone (supplied) and ultrasonic microphone (optional extra). Use the

scheduler tool to create a schedule with multiple periods for ultrasonic and acoustic, then

save this schedule to the SD card you plan to use for deployment. When deploying the

recorder, insert the SD card with the schedule saved on it, then select

Schedule Recording

Mode

Содержание CHORUS

















































Результаты поиска

Содержание CHORUS

Отзывы:

Похожие инструкции для CHORUS

Бренды по названию

Популярные бренды

TiTLEY Scientific CHORUS, Руководство пользователя

Результаты поиска

Содержание CHORUS

Отзывы:

Похожие инструкции для CHORUS

Бренды по названию

Популярные бренды