TiTLEY Scientific CHORUS, Руководство пользователя

Страница: 43 / 48

43
METADATA
All metadata recorded on the Chorus is saved to files in the GUANO (Grand Unified Acoustic
Notation Ontology) format. This format is now the standard across bat acoustic fields. For
recordings from a Chorus, it includes the following:
•
Timestamp
•
Recorder make and model
•
Recorder ID (serial number)
•
GPS location
•
Internal temperature at time of recording
•
Recorder firmware version
•
High pass filter status (On or Off if applicable)
•
Trigger & microphone settings
•
Battery voltage
•
Custom metadata (if using a schedule)
TROUBLESHOOTING & FAQS
How do I set up the detector for ultrasonic bat recording?
If you are using the Chorus with an ultrasonic microphone to record ultrasonic frequencies
(e.g. bat echolocation), you will need to check the following settings:
1.
Mount an ultras side B).
2.
Place the recorder in your desired Recording Mode (e.g. Night Only, Continuous,
Schedule).
3.
Choose your preferred File Type: Full Spectrum (.wav) or Zero Crossing (.zc).
4.
Change the Sample Rate to an ultrasonic frequency (500, 320 or 192ksps).
5.
Ensure the recorder is in Triggered Activation Mode and check the trigger settings are
appropriate.