Titgemeyer TIOS EL18, Руководство по эксплуатации

Страница: 8 / 28

8
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 email: fasteners@titgemeyer.com
L
Tb1547GB(1113)1
TIOS
®
EL18 Battery-operated Lockbolt Tool
Operating instructions
Safety notes
(continued from page 7)
• Whenever possible, always charge the lithium-ion battery immediately after using and never
store it when empty. The battery will keep its capacity constant for a longer time (max. loss
per year: 5%) if stored separately from the tool and charger.
• For safety reasons, the lithium-ion battery should not be left in an active charger for longer
than 36 hours. Whenever possible, remove the battery from the charger as soon as it is fully
charged.
• Whenever possible, always remove the battery from the device before transporting. This will
prevent you from unintentionally switching the device on and also prevent the battery from
running down very low.
• Never expose the lithium-ion battery to high temperatures (+ 50 °C) or direct sunlight. If the
battery becomes hotter than 50 °C while in operation (charging or discharging), immediately
remove it from the charger or rivet tool.
• Keep unused batteries away from paper clips, coins, keys, nails, screws and any other small
metal objects that might bridge/short-circuit the contacts. Never open or short-circuit the
battery. Short-circuiting the battery contacts may result in burns, fire or explosions.
• Batteries may leak when subjected to extreme use or temperatures. Keep your skin and eyes
away from a leaking battery at all times. The liquid contained in a battery is corrosive and
may cause chemical burns in human tissue. Should the liquid come into contact with the
skin, immediately wash it off with soap and water and then with lemon juice or vinegar. If the
liquid comes into contact with the eyes, rinse with water for 10 minutes and then seek the
advice of a doctor immediately.
• Never charge the battery in temperatures BELOW 10 °C or ABOVE 40 °C.
• The charger must never be connected to a step-up transformer, generator or DC socket.
• Ensure that the ventilation slots on the charger are never covered or clogged.
• Never store the electrical tool or battery in areas where temperatures exceed 50 °C.
• Never store the battery in a box or enclosed container. The battery must be stored in a
well-ventilated area.
• No changes, modifications or alterations may be made to the tool without the manufacturer’s
permission. No conversions may be performed without first being approved in writing by
Gebr. Titgemeyer GmbH & Co. KG. Any parts not in fully-working order must be replaced
without delay.