Titgemeyer TIOS EL18, Руководство по эксплуатации

Страница: 7 / 28

7
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 email: fasteners@titgemeyer.com
L
Tb1547GB(1113)1
TIOS
®
EL18 Battery-operated Lockbolt Tool
Operating instructions
Safety notes
Intended use
Foreseeable misuse
Safety notes
The TIOS EL15 battery-operated lockbolt tool may only be used to install lockbolts and blind
rivets, as described in these operating instructions.
The TIOS EL18 rivet tool is designed to install lockbolts with a max. diameter of 6.5 mm and
high-strength blind rivets with a diameter of 6.4 mm at a max. installation force of 18 kN.
This rivet tool may only be used as a manual tool!
The customer is solely responsible for any modifications made to the rivet tool.
The safety notes contained in these operating instructions must be strictly observed at all times.
Never throw or drop the rivet tool!
This tool has been made to the very latest engineering standards and in keeping with the
approved safety guidelines. It can be operated safely provided that the safety notes and
intended use are observed and that the appropriate personal protective equipment is worn.
• Danger, electrical tool:
Only allow trained electricians to carry out work on the rivet tool. Check the electrical equip-
ment at regular intervals. Repair any loose connections and damaged leads immediately.
• Observe the corresponding accident prevention regulations that apply in your country.
• Never point the tool at anyone while it is in use.
• Keep your work area clean, tidy and well-lit. Bad housekeeping and poorly-lit work areas
increase the likelihood of accidents.
• Never use electrical tools in explosion-prone areas where combustible liquids, gases or dust
particles are found. Electrical tools generate sparks which can ignite dust or vapours.
• Take environmental conditions into account. Never expose electrical tools to rain. Never use
electrical tools in humid or moist environments.
• Only use the rivet tool within its specified range of performance. Overloading it may result in
the tool being damaged or in risks to your safety.
• Always wear protective glasses. It is recommended that you wear suitable personal
protective equipment, such as protective clothing, non-slip safety shoes, a hard hat and ear
protection, depending on what electrical equipment is being used
• Remove the battery before changing the accessories or storing away the tool. This pre -
cautionary measure will ensure that the electrical tool does not start running accidentally.
• Repairs must only be performed by trained personnel using original spare parts which can
be obtained from Gebr. Titgemeyer GmbH & Co. KG. This will ensure that the tool remains
safe to use at all times.
• Only use the designated batteries in the electrical tools.
The use of other batteries may result in injury or fire.
• Only charge the batteries in the chargers recommended by the manufacturer. The battery
may be destroyed if inserted into an unsuitable charger.