Titgemeyer TIOS EL18, Руководство по эксплуатации

Страница: 19 / 28

19
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 email: fasteners@titgemeyer.com
L
Tb1547GB(1113)1
TIOS
®
EL18 Battery-operated Lockbolt Tool
Operating instructions
Maintenance intervals
Interval
Daily before each use
Daily before each use
Daily before each use
Activity
Check for cracks
Check the pulling head for
rivet diameter as well as wear
and tear
Check the jaws and jaw case
How?
Visual inspection
Check pulling head for wear
and tear
Check the clamping jaws in
the pulling heads
Who?
Operator
Operator
Operator
Remarks
If tears appear, submit the
rivet tool to Maintenance.
Replace pulling head if
necessary
Clean or replace clamping
jaws if necessary (see “
Installing the pulling head”)
Cleaning the pulling unit
1
2
Loosen the jaw case using an SW 13 and SW 17 open-end spanner.
Remove the jaw case body (4) from the jaw case (Z) using an SW 17 open-end spanner
and 1/4 inch Allen key.
Clean all the parts thoroughly using a cleaning rag or compressed air.
Reassemble following the above steps in reverse order.
Before reassembly, grease the jaws with an acid-free oil.
Remove the battery before beginning any work on the rivet tool.
Loosen the lock nut (17) and remove by pulling it forwards.
Pull the pulling head (14) and guide bushing forwards and remove.
2
3
Z
Z
4