Titgemeyer TIOS EL18, Руководство по эксплуатации

Страница: 18 / 28

18
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 email: fasteners@titgemeyer.com
L
Tb1547GB(1113)1
TIOS
®
EL18 Battery-operated Lockbolt Tool
Operating instructions
LED display (operating modes)
The display is located at the back of the housing, below the spent mandrel collector.
The following statuses can be displayed on the LED display when the tool is in operation:
Description of decal:
LED status for rivet tool
Maintaining the rivet tool
Caution Risk of injury due to improper care! All maintenance, care and service work on rivet tools
must be conducted by suitably trained personnel. If the tool is used as intended, the operator
should be at no risk. The operator may only carry out the work described in these operating
instructions.
Replace or charge battery.
Malfunction: Defective charger
LED-display Description of status:
Function test after inserting the battery
and pressing the trigger.
Mandrel collector not or not correctly
fitted, or pressure-sensitive switch not
pressed.
Battery almost flat but still operable.
Battery flat, no longer operable.
Malfunction: Current overload due to
excessive break-load on the mandrel
or overheated tool (55 °C)
Malfunction: The rivet tool is out of
order and no longer works.
Aktion
Fit spent mandrel collector correctly and
press the pressure-sensitive switch.
Replace or charge battery.
Replace or charge battery.
Wrong blind rivet and/or lockbolt used,
or pulling unit is dirty or damaged.
Service the pulling unit or allow the tool
to cool down.
Fit mandrel collector correctly.
Contact your supplier.
Lighting LED comes on briefly;
LED display briefly turns red then green
LED display turns green
LED display flashes orange
LED display remains orange
LED display flashes red
LED display remains red