Titgemeyer TIOS EL18, Руководство по эксплуатации

Страница: 17 / 28

17
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 email: fasteners@titgemeyer.com
L
Tb1547GB(1113)1
TIOS
®
EL18 Battery-operated Lockbolt Tool
Operating instructions
Installing the lockbolt
What to remember!
Note
Important
Note
The pulling heads and lockbolts you are using may differ slightly from the ones shown in
the illustrations below.
Damage to materials! Always hold the tool at right angles (90°) to the area where you want t
o install the lockbolts. If held at another angle, the lockbolt will not install correctly.
For details on hole diameters and clamping areas, please refer to the specifications in the
rivet manufacturer's catalogue.
• Getting started
• Insert the lockbolt (a) into the pre-prepared hole
• Slide the locking ring (b) over the mandrel of the lockbolt (a), making sure it is correctly
positioned
• Hold the head of the lockbolt (a) in place. Slide the rivet tool and pulling head (Z) over
the mandrel of the lockbolt (a) and press firmly up against the locking ring (b).
• Press the trigger as far as it will go and hold down. The pulling head will slide over the
locking ring, causing it to deform and press the material into the grooves on the stem.
• Release the trigger. The detached mandrel is then discharged into the spent mandrel
collector when you install the next rivet/lockbolt.