3
TILTING RISK
Use caution when lowering the lift and make sure the tracks stay level with the safety locks.
•
Maintenance or repair work should be done by authorized service personnel only.
•
Work on the electrical equipment should be done by certified licensed electricians only.
•
Ensure that ecologically harmful substances are disposed of in accordance with the
appropriate regulations.
•
To prevent the risk of damage, do not use high pressure / steam jet cleaners or caustic
cleaning agents.
• Do not replace or override the safety devices.
WARNING:
Risks the personnel could encounter, due to an improper use of the lift, are
described in this section.
CRUSHING RISK
During lowering of runways and vehicles, personnel must not be within the area
covered by the lowering trajectory. The operator must be sure no one is in danger before
operating the lift. Stay clear of the lift when lowering or raising vehicles. Keep hands and
feet away from moving parts and especially points that could pinch. Keep your feet clear of
the lift when raising and lowering vehicles.
BUMPING RISK
When the lift is stopped at relatively low working height, the risk of bumping against
projecting parts increases. Always be aware of your surroundings and avoid bumping your
head or body on the lift or the vehicle.
1.4 SAFETY INSTRUCTIONS FOR MAINTENANCE
1.5 RISKS
Содержание HD4P-12000
