Titan 125FLAILDB, Руководство оператора

Страница: 15 / 26

15
BELT TENSION
CAUTION
Excessive tension on the belt may lead to premature failure of belt and drive components.
Excessive tension on the belt may also lead to a safety hazard to the operator or bystanders.
The belt tension should be checked after the first 20 hours of use. And then every 40 hours of
use.
1. Check belt tension by applying approximately 22 pounds of pressure halfway between the
pulleys. The belt should defect approximately 3/8”.
Figure 3-1: Belt tension
1.
Remove pulley cover and loose gearbox mounting bracket bolts as well as adjusting
bracket bolts.
2.
Loose tension lock nuts and turn the bolt until desired tension is achieved. Retighten
tension lock nuts and then retighten adjusting bracket bolts, last retighten gearbox
mounting bolts. When the belt has the correct tension, the gearbox should be adjusted so
that the gearbox extension is running straight (parallel) with the Flail mower.
SECTION 4: MAINTENANCE
MAINTENANCE
Proper servicing and adjustment are the key to the long life of any farm implement. With
careful and systematic inspection, you can avoid costly maintenance, time, and repair.
KNIFE REPLACEMENT
IMPORTANT : Make sure that the replacement knife is the same type and similar weight as the
others on the mower. This will keep the rotor rotation balanced. Hammer blade is the standard
configuration of this mower. If required, Y-type blade is optional.