Titan 125FLAILDB, Руководство оператора

Страница: 12 / 26

12
1. The safety pin of hitch weldment is designed to limit the rotation of hitch tube weldment
around the screw M24x140.
2. Remove and insert the safety pin into the left hole on the lifting bracket weldment of
swing arms sub-assembly before operation.
3. Fill the gearbox with the proper amount of SAE 90 gear oil before operation.
4. Remove the packaging of the boot sub-assembly.
5. Insert one of Boot weldments into the tube on swing arm weldment smaller and boot
pin and insert R pin into the hole on boot pin.
6. Insert another boot weldment into the tube on hitch tube weldment as well as boot pin
and insert R pin into the hole on boot pin.
TRACTOR HOOK-UP
1. Be certain that tractor draw bar will not interfere. Move draw bar ahead or remove if
required. Draw bar should also be checked for clearance when unit is being raised for the
first time.
2. Align lower link arms of tractor to hitch clevises on mower. Insert lower hitch pins into
lower ball swivels and attach link pins.
3. Attach tractor top link to upper floating hitch on mower with pin supplied. Secure with lock
pin.
4. Adjust tractor top link in or out to place upper hitch pin vertically above or slightly behind
lower hitch pins to allow mower flotation. The mower should be run with the back 15
degrees lower than the front.