IN
TIRE
Sensor Installation Manual
–
Michelin MiniSRT
Patch
For installation of Michelin Mini SRT patch please refer to the latest installation manual provided by
Michelin. The following instructions concern the mounting of sensors into a glued patch.
The following parts are required (except the sensor itself):
Michelin Mini SRT Patch
(already glued onto tire bead toe)
Sensor Clip
Velcro 25 x 120 mm
Installation of the sensor into a patch
1.
Before installing the sensor into the patch check the following details:
•
Ensure the sensor clip & Velcro are not damaged or broken
•
Ensure the Velcro is of size 25 x 120 mm with cut angles 3 x 3 mm
•
Ensure the Mini SRT Michelin patch is glued close to the bead toe on the bead protecting
rubber (PT for Protector), not on the butyl inner liner
•
Ensure the inside of the tire is clean and dry
2.
Slide sensor into the adapter clip (Photo K & L).
