![TIPTEL Ergophone C Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/tiptel/ergophone-c/ergophone-c_programming-instructions-manual_1118837023.webp)
22
Programming
Enter code 997 for “Deleting the phone book entries completey”.
Press the P-key. The phone book entries are completely deleted.
Setting the handset volume
You can choose between two basic settings:
a) Handset volume “very loud” (for people who are hard-of-hearing) and
b) Handset volume “normal loud” (for persons with normal hearing).
Each of the basic settings has a volume range allocated to it that is adjustable with the
right slide switch: a) the “very loud” range and b) the “normal loud” range.
The phone comes set for “very loud.”
The volume set with the slide switch remains intact with every new call.
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter
code 100 for “Handset very loud” or
code 101 for “Handset normal loud.”
Press the P key. The entry is stored.
Note:
When a call is in progress, with setting a) volume can be lowered, and with setting b) it can
be raised, by means of the triangular key. See operating instruction, page 20.
Adjust ringing signal
Activate/deactivate ringing signal
#
Press the P key and afterwards press the # key briefly.
Enter
code 20 for “ringing signal OFF” or
code 21 for “ringing signal ON”