Infrared Thermometer
User Guide
Household Guardian
Switch
USB Interface
Indicator Light
Button
Display
Infrared Sensor
Temperature
Measuring Head
Battery Cover
Tripod Interface
Nameplate
Hanging Hole
1. Introduction
2. Specifications
3. State Description
4. Operation Instruction
1. Accuracy:±0.2°C (34~45°C, place it in the operating environment
for 30 minutes before use)
2. Abnormal automatic alarm: fl”Di Di” sound
3. Measuring distance: 3cm~8cm automatic measurement
4. Screen: digital display
5. Transmission interface: Type-C
6. Adaptable power supply: 3 AAA batteries (external power supply
5V1A)
7. Install method: Placed on the desktop, nail hook, bracket fixing
8. Environment temperature: 10
℃
~40
℃
(recommended 15
℃
~35
℃
)
9. Measuring range: 0~50
℃
10. Response time: 0.5s
11. Standby: 5S automatic standby during non-working hours
12. Input: DC 5V 500mA
13. Weight: 73g
14. Dimensions: 68x73x36.2mm
15. Counting capacity: 9999 times
16. Temperature record: 30 sets
1. Standby: The display shows the
current time.(Fig. 1)
2. Insufficient power: The horizontal
bar in the display turns on in turn.
(Fig. 2)
3. Normal temperature: the display
shows the temperature and the
green light flashes at the top.
(Fig. 3)
4. Abnormal temperature: the display shows the temperature and the
red light flashes at the top.(Fig. 4)
(Fig. 1)
(Fig. 2)
(Fig. 3)
5. Out of range:
‘Lo’: Ultra-low temperature than 35 degrees Celsius.(Fig. 5)
‘HI’: Ultra-high temperature than 42 degrees Celsius.(Fig. 6)
(Fig. 4)
(Fig. 5)
(Fig. 6)
1. Temperature measurement:
Front of the thermometer and approach it with 3-8cm.(Fig. 7)
2. Temperature unit setting:
Press the SET button to set temperature unit, press the left and
right buttons to switch between Celsius and Fahrenheit (Fig. 8,
Fig. 9), C: Celsius, F: Fahrenheit.
(Fig. 7)
(Fig. 8)
(Fig. 10)
(Fig. 11)
(Fig. 13)
(Fig. 14)
(Fig. 12)
(Fig. 9)
3. Mode setting:
Press the SET button twice to set the working mode, press the left
and right buttons to switch the mode. Surf :surface mode, body:
body mode, coun: counting mode. (Fig. 10, Fig. 11, Fig. 12)
4. Alarm temperature setting:Press the SET
button three times to enter the alarm
temperature setting mode, press the left
and right buttons to set it. (Fig. 13)
5. Time setting:
Press the SET button four times to enter
the time setting mode. (Fig. 14)
6. Battery installation:
(1) Open the battery cover.
(2) Install three AAA batteries correctly.
7.Install method: Placed on the desktop, nail hook, bracket fixing.
Warnings
1. It is the user’s responsibility to ensure the electromagnetic compatibility
environment of the device so that the device can work normally.
2. It is recommended to evaluate the electromagnetic environment before
using the device.
3. When changing the operating environment, the device must be left for
more than 30 minutes.
4. Keep away from air conditioners, fans, etc.
5. Please use qualified and safety-certified batteries
TIP TEMPerature Products · 340 W Broad Street, Burlington, NJ 08016 · P 1-800-TIP-TEMP · F 609-239-1911 · E [email protected]
www.tiptemp.com
sku
SQEALM003
