INSTALLATION
This thermostat range has been developed to control
electric underfloor or water heating or water/gas boiler
system. These units are designed for use in commercial,
industrial, civil, and domestic properties.
•
Simple installation
•
Acrylic face plate
•
Large, backlit display
•
Sleek, contemporary design
•
Elegant chrome frame
•
Feather touch control panel
•
5+1+1 six period per day programming
•
Simple, one-touch temperature control over-
ride. Pre-set temperatures maintained within
+/- 1°C Internal and external sensors allow
control of
•
both air and/or floor temperatures
•
Suitable for installation in a standard single back
box.
•
WIFI/ZIGBEE/MODBUS communication optional
Sensor
：
NTC
Accuracy
：
±1
℃
Power Consumption
：
< 1.5W
Timing Error
：
<1
％
Power Supply
：
95 ~ 240VAC, 50 ~60Hz
Current Load
：
5A
（
water heating, water/gas boiler),
16A
（
electric heating)
Shell material
：
PC+ABS (flame retardant) Dimension
：
86x86x13.3mm
Ambient Temp.
：
0-45
℃
，
5-95
％
RH
（
Non-condensing
）
Storage Temp.
：
-5-55
℃
Installation Hole distance: 60mm
Press this button to power on/off your thermostat.
Time setting: Press button to set min/hour/day.
Manual/program setting.
Manual mode:
Press to select manual mode.
When you are on manual mode will show in bottom
left corner. Press to select desired temperature.
Program mode:
Press to select program mode.
When you are on program mode will show in bottom
left corner. Press for 5 seconds to activate program
set mode. Press to set the desired (5+1+1) six periods
time and temp. When you have set your time and temp
period press to save and return to home screen.
Temporary mode
: During program mode. If you need to
change the temp. The icons will appear. The pre-
program setting will return in the next period.
Child Lock set:
Press and hold the button for 5
seconds to lock/unlock your thermostat.
Factory re-set
: Press button for 5 seconds to enter
program mode. Press and hold for 5 seconds.
When the ‘def’ flashes on the screen your thermostat
has been re-set to factory settings.
Turn off the stat Press button for 5 seconds to
enter configuration menu. During this menu,
short press to change parameters. Press to
confirm the setting.
When power is on, press for 5 seconds to enter
programmable mode. Press to change the different
items. Press to set the relative values.
The order is Minute → Hour → Temperature →
Minute
timing-
on → Hour timing
-
on→ Minute timing
-
off→ Hour
timing-
off→ Temperature
adjusting.
(“Mon
-
Fri”,”Sat”,”Sun”, is “5+1+1” programmable
mode, every mode has two times zones and a time
temperature setting)
TECHNICAL INFORMATION
APPLICATION
FEATURES
LCD DISPLAY REFERENCE
QUICK FUNCTIONS
QUICK FUNCTIONS
WIRING DIAGRAM
CONFIGURATION MENU
PROGRAM SETTING
DIMENSIONS
