www.tinytag.info
www.tinytag.info
www.tinytag.info
www.tinytag.info
Issue 2
Issue 2
Issue 2
Issue 2 (16th June 2017) E&OE
Tinytag Plus Radio Ethernet Receiver
Tinytag Plus Radio Ethernet Receiver
Tinytag Plus Radio Ethernet Receiver
Tinytag Plus Radio Ethernet Receiver
ACSRF-4040
The ACSRF-4040 receiver is an Ethernet device that is used to collect data
from a network of Tinytag Radio data loggers.
The receiver plugs into an Ethernet port on a LAN allowing data to be passed
from the radio network to the computer running the Connect Gateway software
that manages the system (ideally, this software is installed on a server). Data
can then be viewed across the network or the Internet using the Tinytag
Explorer Connect software.
The Ethernet receiver allows a network of loggers to be used without the need
for a computer where the logging is taking place.
The typical radio range of the receiver on a clear line of sight is 200m.
The receiver is a PoE (Power over Ethernet) device that also has back-up
batteries. If power to the computer running the system goes down, or there is
a problem with the LAN, the receiver will maintain the mesh network until the
fault is corrected, allowing faster access to data when the system is restored.
•
LAN connected Radio receiver
•
Robust data network
•
Easy to install
•
200m typical range (line of sight)
•
Power over Ethernet (PoE) with battery back-up
•
Low battery monitor
•
User-replaceable batteries
•
Waterproof case
connect
