Tinyloc R1 Plus Скачать руководство пользователя страница 1

INSTRUCTIONS MANUAL

 1. INTRODUCTION

This manual provides instructions for the operation of your new TinyLoc R1+ digital receiver and an expla-
nation of the technique of radio-tracking.

The receiver is very simple to operate by using a menu to select different options in a similar way to a cell 
phone. 

Thanks to its small size, light weight and ergonomics, the search can be done even with only one hand

The receiver incorporates a small folding antenna on one side although, if necessary, it may be 
connected to an outside antenna with more gain.

The receiver includes a light sensor to illuminate the screen when day light is insufficient.

It operates on normal batteries, so that if the batteries become flat while in the field it is not neces-
sary to recharge them for hours.

A frequency search consists of pressing a single button, making manual tuning unnecessary. This 
innovation means that the signal sent by the transmitter is received at the ideal frequency.

It offers improved features, with less background noise, more sensitivity and better discrimination. 
All this means there is a considerable increase in the operating range.

It covers a wide range of frequencies thus enabling it to work with a higher number of transmitters 
and reducing the probability of one interfering with the other (3,790 channels).

It allows to save up to 100 transmitters 

Each receiver includes:
A practical belt-mounted pouch
4 alcaline batteries

Содержание R1 Plus









Отзывы: