E3050IS658 0B
E3050IS658 0B
For more developmental
information and playing
tips please visit:
www.tinylove.com
©2018 Tiny Love Ltd.
www.djgusa.com (800) 544-1108
www.tinylove.com
Made in China. Fabriqué en Chine.
Hecho en China.
Styles and colors may vary. Les styles et
les couleurs peuvent varier. Los estilos
y los colores pueden variar
Distributed by (distribué par)
(distribuido por)
Dorel Juvenile Group, Inc., 2525 State
St., Columbus, IN 47201-7494
Dorel Juvenile Canada, 2855 Argentia
Road, Unit 4, Mississauga, ON, L5N 8G6
© All rights reserved, Tiny Love Ltd.
Model Number:
1305000, TO 063
English
For customer service information please visit our website: www.tinylove.com
Into the Forest™
Tiny Dreamer
™
Musical Projector
Tiny Dreamer
TM
Musical Projector
INSTRUCTION GUIDE
INSTRUCTION GUIDE READ ALL INSTRUCTIONS BEFORE USE.
KEEP THESE INSTRUCTIONS AS THEY CONTAIN IMPORTANT INFORMATION.
WARNING
•
This product is not a toy.
•
Possible impact injury, keep out of baby's reach.
•
Remove all packaging materials before use. Adult
assembly required
.
•
Strangulation hazard - Children have STRANGLED in cords.
Keep cord out of the reach of children
(more than 3 ft (0.9 m) away).
IMPORTANT
•
This product is intended for visual stimulation and is not
intended to be grasped by a child.
•
Do not modify or alter this product in any way.
•
Adapter not included.
•
When charging, use only UL certified USB power adapter.
•
The rechargeable battery cannot be replaced.
•
This product is a class III device.
•
Product is for indoor use only.
CARE & STORAGE
1. Use a damp cloth to wipe clean.
2. DO NOT submerge any part of the product in water.
FCC STATEMENT (UNITED STATES ONLY)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and
the receiver
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.
•
Changes and Modifications not expressly approved by
the manufacturer or registrant of this equipment can void
your authority to operate this equipment under Federal
Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
GENERAL
CHARGING INFORMATION
1.
The Projector Soother must be charged before being used
for the first time:
• Connect one end of the USB cable to the Projector
Soother and the other to a UL certified USB power
adapter.
• Leave for at least 4 hours to charge.
• When charging the LED light will be red, when fully
charged it turns green.
• When fully charged, disconnect the USB cable and
remove it from the Projector Soother.
2. When battery is almost empty, red LED light will blink. You
are therefore advised to charge the Projector Soother.
3. If the Projector Soother is not used for several days, the
battery may discharge. You are therefore advised to
charge regularly using the USB cable provided.
CRY SENSORE MODE
•
To activate the cry sensor mode press the CRY SENSOR
button (See illustrations below).
•
A Blue LED light will turn on.
•
The sensor will activate the program when it detects
baby’s cry for approximately 4 seconds without
interruption.
•
The unit will be activated for 10 minutes.
MP3 PLAYER MODE
•
Connect one end of the USB cable to the Projector
Soother and the other end to your computer.
•
Make sure the Projector Soother is in “on” position.
•
The MP3 Player is then automatically recognized.
•
In this mode music and projection could not be turn on.
Handle loop for
easy carry on
Auto off timer
USB cable is
included
Rechargeable
battery & USB cable
On/Off
17 lullabies melodies
Music player control
Cry sensor
Nightlight
Projection
Volume control
5 soothing white noise
Built-in MP3 music player
1. Projector Soother
2. Glowing Night Light
3. Portable Lantern
