Tintometer 15150001, Инструкция по эксплуатации

Страница: 72 / 176

Operation XD 7500
72 ba77191e01 - 71310060 04/2018
4.6 Measuring the Absorbance / % Transmission
4.6.1 General information
The absorbance or transmission respectively is measured without the use of
any methods or profiles. All settings are made in the measurement process.
Measuring against
the Reference
absorbance
The absorbance or transmission can alternatively be measured against the
absorbance of the zero adjustment or against a
Reference absorbance
determined by yourself (see Section 4.6.3 M
EASURING AGAINST THE
R
EFER
-
ENCE ABSORBANCE
).
4.6.2 Measuring the absorbance or transmission
The settings of the last measure-
ment are active.
1
Using [Wavelength] , change the
wavelength as necessary.
2
Using [Absorbance] <–> [Trans-
mission] , you can switch over
between absorbance and trans-
mission measurement.
3
If necessary, use or measure a
reference measurement with
[Ref-
erence] (see Section 4.6.3).
4
Insert cell (round cell or rectangu-
lar cell)(see Section
4.2.5 I
NSERTING A CELL
).
The photometer starts measuring
automatically.
<HOME>
Absorbance / % Transmission
Absorbance
16.01.17 9:52
To start measurement,
insert cell or press <START/ENTER>
300 nm
Setup Wavelength Transmission Reference
Absorbance 16.01.17 9:52
0.860
489 nm 10 mm
Setup Wavelength Transmission Reference